- 相關推薦
IBM公司認證試題題庫（附答案）
IBM公司認證試題一
1. A user wants to be permanently added to the dba group. Which of the following commands or processes can be used to accomplish this?
A. chgrp
B. chuser
C. edit /etc/user
D. edit /etc/security/group
Answer: B
2. An administrator needs to be able to list the number and size of backup sets on a tape. Which of the following procedures accomplish this?
A. Use the tcopy /dev/rmtO.l until an end-of-tape error notification is received.
B. Use the cpio -idmv < /dev/rmtO.l until an end-of-tape error notification is received.
C. Use the tar -tvf /dev/rmtO.l repeatedly until an end-of-tape error notification is received.
D. Use the dd if=/dev/rmt0.1 bs=128k count=EOT until an end-of-tape error notification is received.
Answer: A
3. An administrator needs to change a system's run level from level 2 to level 3. What is the appropriate method to accomplish this?
A. Use the reboot command.
B. Edit the /etc/reboot file and reboot the system.
C. Edit /etc/.init.state file and reboot the system.
D. Use the telinit command.
Answer: D
4. Under which of the following circumstances must a JFS filesystem be used instead of a JFS2 filesystem?
A. filesystem will contain 100GB files
B. filesystem resides on a 32-bit system
C. filesystem contains a large number of small files
D. filesystem compression is required
Answer: D
5. An administrator received a call from a user whose PC crashed while using vi to edit a file. The user wants the edited file back. Where should the administrator look for the file?
A. /tmp
B. /var/preserve
C. /var/tmp/$USER
D. $HOME/.vi
Answer: B
IBM公司認證試題二
1.What components are needed to access the internal storage on a BladeCenter S?
A.Optical Pass-Thru Module and one SFF FC adapter per blade
B.One iSCSI adapter per blade
C.SAS Connectivity Module and one SAS expansion card per blade
D.Integrated internal storage adapter
Answer:C
2.A customer using IBM BladeCenter H wants redundant and separate management and production LANs. Which of the following is required to provide redundant connections to separate LANs within the BladeCenter?
A.Four Cisco Systems Fibre Intelligent Gigabit Ethernet switch modules
B.Two Cisco Systems Fibre Intelligent Gigabit Ethernet switch modules and a BladeCenter Gigabit SFF Ethernet expansion card
C.Two IBM Server Connectivity Modules and an Ethernet expansion card CFFv
D.Four BNT/ Nortel Layer 2-7 GbE switch modules and a BladeCenter Gigabit SFF Ethernet expansion card
Answer:D
3.A customer is installing a Myrinet Cluster Expansion Card in an existing IBM LS21 blade server. Which bay should the Optical Pass-thru Module be placed?
A.1
B.2
C.3
D.4
Answer:D
4.A prospect has an new Director of IT. They are reviewing all servers to reduce the number of operating systems in their IT operations. Which operating system is supported on an LS21 blade?
A.Red Hat Enterprise Linux v.4 Update 4 (AS, ES, WS)
B.Red Hat 9
C.Novell Netware 5.2
D.Microsoft Windows 2000 Professional
Answer:A
5.A customer has an HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure?
A.Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade BIOS to boot from SAN.
B.Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN.
C.Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver.
D.Configure the blade BIOS to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD.
Answer:C
IBM公司認證試題三
1. Which construct is used to select the media type for the IBM System Storage TS7700 Virtualization Engine allocations?
A. Data Class
B. Storage Class
C. Storage Group
D. Management Class
Answer: A
2. Your customer purchased an IBM TS3500 Tape Library and 3953 Library Manager. You need to provide the customer with the detailed worksheets to complete for the installation. In which resource do you find these worksheets?
A. 3953 Tape System SAPR Guide
B. 3953 Introduction and Planning Guide
C. TS3500 Introduction and Planning Guide
D. IBM TS3500 Tape Library with System z Attachment Guide
Answer: A
3. A customer wants to connect two libraries to a single modem. Which feature is required to accomplish this?
A. Remote Support Switch
B. Remote Support Facility
C. Remote Support Manager
D. Remote Console Facility
Answer: A
4. What is used to identify LTO Ultrium 3 WORM-capable drives?
A. serial number of the drive
B. logo at the front of the drive
C. label on the back of the drive
D. level of code the drive contains
Answer: D
5. A customer is adding a TS3500 Tape Library to an existing tape environment. Which statement is true about the necessity of a Systems Assurance Product Review in this situation?
A. A Systems Assurance Product Review must be performed before installation, providing it is the first TS3500 the customer installs
B. A Systems Assurance Product Review must be performed before installation, providing it is indicated in the SAPR trigger criteria.
C. It is not necessary to perform a Systems Assurance Product Review before installation, providing the customer already has a TS3500.
D. It is not necessary to perform a Systems Assurance Product Review before installation, providing the customer's management approves it.
Answer: B
IBM公司認證試題四
1.Which three drivers come with a default installation of IBM Tivoli Netcool/OMNIbus v7.2 on Windows platform? (Choose Three.)
A.NetBEUI
B.NetBIOS
C.DecNET
D.Token Ring
E.Named Pipe
F.Winsock TCP/IP
Answer:C E F
2.A user on a remote machine receives an error and cannot connect to the ObjectServer with a client.How can connectivity from a UNIX client to the ObjectServer be verified?
A.nco_ping
B.nco_ping
C.nco_ping
D.nco_ping -server
Answer:B
3.The process control is configured on a system. All processes, except the probe, are PA Aware. What is the best way to configure $NCHOME/omnibus/etc/nco_pa.conf?
A.nco_service mnibus ServiceType = Master ServiceStart = Auto process rimary NONE process ackup rimary process igate rimary backup process robe1 rimary
B.nco_service mnibus ServiceType = Master ServiceStart = Auto process igate NONE process rimary igate process ackup igate process robe1 rimary backup
C.nco_service mnibus ServiceType = Master ServiceStart = Auto process rimary NONE process ackup rimary process igate backup process robe1 rimary
D.nco_service mnibus ServiceType = Master ServiceStart = Auto process rimary NONE process ackup rimary process robe1 rimary process igate robe1
Answer:C
4.A large service provider with one NOC at a central Data Center and several Business Silo's spread across the nation adding up to 60 native desktop clients. The customer does not want to maintain desktop Object Servers. What is the best solution architecture for this environment.
A.two high capacity servers running Object Servers that support event collection and support the NOC users
B.a single low capacity server running an Object Server, all event collection and display is done from this server
C.a tiered architecture where one Object Server is collecting events and running automations and another Object Server to support the NOC users
D.a tiered architecture with a single Object Server for event collection, and heavy use NOC users are using desktop object servers, all other users use the single Object Server
Answer:C
5.Which statements are true about creating a tool with an external action? (Choose Three.)
A.The users must have ISQL Write rights.
B.The path must be the same for all users.
C.The external action must be available to all users.
D.You must enable journaling to make sure users are using the tool correctly.
E.The users must have Super User permissions to execute the external action.
F.You must make sure the platform tab is checked if the external tool is OS specific.
Answer:B C F
IBM公司認證試題五
1. A customer has 2 VIO servers, supporting 4 client partitions. They want to configure Shared Ethernet Adapter Failover. What is the minimum number of physical Ethernet adapters required for each VIO server?
A.1
B.2
C.4
D.8
ANSWER: A
2. What is the minimum requirement to update the managed system's firmware from the HMC if inventory scout is already installed?
A.A public internet connection
B.All logical partitions must be active
C.One partition must be configured with Service Authority
D.A local repository must be configured prior to the update
ANSWER: C
3. A customer wants to use Live Application Mobility which comes as part of the Workload Partition virtualization offering. Which of the following is the minimum configuration that will satisfy the customer requirement?
A.AIX 6.1 with POWER6
B.AIX 6.1 with POWER4
C.AIX 5.3 with POWER5
D.AIX 5.3 with POWER4
ANSWER: B
4. A customer wishes to use Live Partition Mobility for system maintenance. What is the minimum requirement?
A.PowerHA
B.Virtual I/O server 1.4
C.AIX Enterprise Edition
D.PowerVM Standard Edition
ANSWER: C
5. A customer is planning to use Live Partition Mobility on a new Power 570. Which of the following must be considered when pre-configuring the system in the IBM System Planning Tool (SPT)?
A.VIO-server setup is unsupported in SPT
B.Live Partition Mobility is unsupported in SPT
C.IVE setup is unsupported when using Live Partition Mobility
D.VIO-server setup is unsupported when using Live Partition Mobility
ANSWER: C
IBM公司認證試題六
1. Which of the following statements is true regarding implementing Live Partition Mobility on two existing POWER6 based systems?
A.The systems must use internal storage for boot purposes
B.All virtualized ethernet adapters must be numbered below 10
C.The mobile partition's network and disk access must be virtualized
D.Each system must be controlled by a different Hardware Management Console (HMC)
ANSWER: C
2. Which of the following statements is true regarding virtual Ethernet redundancy?
A.Specifying an IP Address to ping is optional with Network Interface Backup (NIB) and is optional with Shared Ethernet Adapter (SEA) failover
B.Specifying an IP Address to ping is optional with Network Interface Backup (NIB) and is required with Shared Ethernet Adapter (SEA) failover
C.Specifying an IP Address to ping is required with Network Interface Backup (NIB) and is required with Shared Ethernet Adapter (SEA) Failover
D.Specifying an IP Address to ping is required with Network Interface Backup (NIB) and is optional with Shared Ethernet Adapter (SEA) failover
ANSWER: D
3. Which of the following can be used to re-deploy a system configuration in a disaster recovery scenario?
A.System plan
B.System profile
C.Critical console data
D.VIO server partition profile
ANSWER: A
4. A customer has 5 older POWER5 systems and they want to consolidate them onto a POWER6 system.What information is important to analyze when deciding how to design the new machine using the System Planning Tool?
A.vmstat and iostat data from the older machines
B.The number of CPUs that were installed in the original machines
C.Data from Workload Estimator (WLE) and IBM Performance Management (PM)
D.Performance data that is collected from the new system after it has been put into production
ANSWER: C
5. The system administrator for a company plans to consolidate the workload of several ageing servers onto a new Power server. The administrator's intention is to virtualize all network and disk resources for each LPAR in the new system using VIOS 1.x. Which of the following is correct regarding MAC addresses and World Wide Port Names (WWPN) in a client partition?
A.Each client LPAR will have its own MAC address and WWPN
B.Each client LPAR will have no unique MAC address or WWPN
C.Each client LPAR will have its own MAC address, but no unique WWPN
D.Each client LPAR will have no unique MAC address, but will have its own WWPN
ANSWER: C
【IBM公司認證試題題庫附答案】相關文章：
2016年IBM Lotus認證試題題庫（附答案）08-25
IBM認證試題及答案07-21
IBM認證考試題庫06-16
Lotus認證試題大全（附答案）08-25
IBM Lotus認證試題08-26
Photoshop認證模擬試題題庫08-26
cad中級考試題庫附答案04-27