基于ARM的移動電話系統設計
畢業論文
基于ARM的移動電話系統設計
——硬件電路設計
摘要：在很多需要對遠程數據進行處理的場合中，無線數據采集與傳輸的.應用日益廣泛。目前普遍使用的方案是嵌入式CPU+CDMA，由CPU負責對采集到的數據進行運算和處理，然后交給CDMA模塊將其發送給遠程數據中心。
本文深入研究了基于S3C4510B ARM處理器和CDMA模塊的移動電話開發，它是由CPU、FLASH、MEMORY、CDMA、POWER幾個部分組成，通過Protel99se工具軟件完成了其硬件電路的原理圖設計和印制電路版設計。
本文實現了1個移動電話系統的底層硬件設計，涉及到的技術有CDMA技術、計算機技術、嵌入式技術等，同時滿足了系統低成本，低功耗、小體積和移動靈活的要求。
關鍵詞：ARM；CDMA；硬件電路；印制電路版
The Design of Mobile System based on ARM
——Hardware Circuit Design
Abstract：In the circumstance of processing remote data, wireless data collection and transmission is used widely. Nowadays the commonly scheme is embedded CPU and CDMA, in which CPU collects data and deals with it, and CDMA module transfers data to remote center.
Thesis studies profoundly the hardware circuit design of mobile system, which is based on S3C4510B ARM processor and CDMA module. The system is composed of CPU、FLASH、MEMORY、CDMA and POWER modules. Thesis also introduces the procedure of designing the schematic document and Printed Circuit Board with the Protel99se tool software.
Thesis implements the hardware circuit of mobile system. It adopts many advanced technologies such as CDMA technology, computer technology and embedded technology, and meets the demands of lower cost, lower power consuming, smaller size and higher flexibility.
Keywords：ARM； CDMA； Hardware Circuit； Printed Circuit Board
【基于ARM的移動電話系統設計】相關文章：